{"id":2464,"date":"2026-11-19T18:33:05","date_gmt":"2026-11-19T18:33:05","guid":{"rendered":"https:\/\/physicsfundamentalsinfo.com\/blog\/?p=2464"},"modified":"2026-11-19T18:33:06","modified_gmt":"2026-11-19T18:33:06","slug":"sensible-heat","status":"publish","type":"post","link":"https:\/\/physicsfundamentalsinfo.com\/blog\/thermodynamics\/sensible-heat\/","title":{"rendered":"Sensible Heat: the Energy a Thermometer Can Measure"},"content":{"rendered":"\n<div class=\"pf-citation\"><div class=\"eyebrow\">Definition<\/div><p>\n\nSensible heat is the heat exchanged with a body that changes its temperature, which is why a thermometer registers it. It contrasts with latent heat, which is exchanged at constant temperature while a substance changes phase. For a single phase the sensible heat is the mass times the specific heat capacity times the temperature change.\n\n<\/p><\/div>\n\n<p>Put a thermometer into a pan of water on a hot ring and it climbs, steadily and visibly. Leave the ring on past boiling point and the reading stops dead while the energy keeps pouring in. The heat has not stopped arriving; it has stopped being the kind a thermometer can report.<\/p>\n\n<p>That gap is what this page is built on. Sensible heat is the part of an exchange a thermometer registers, latent heat is the part it misses, and for water taken all the way to steam the part it misses is most of the energy. This page puts a number on &#8220;most&#8221;.<\/p>\n\n<h2>What Is Sensible Heat?<\/h2>\n\n<p>Sensible heat is heat exchanged with a body or a system in a way that changes its temperature, while leaving certain other macroscopic variables, such as volume or pressure, unchanged. It is the heat you can read off a thermometer.<\/p>\n\n<p>Wikipedia&#8217;s summary of <a href=\"https:\/\/en.wikipedia.org\/wiki\/Sensible_heat\" target=\"_blank\" rel=\"noopener\">sensible heat<\/a> puts it as heat whose exchange changes the temperature of the body or system but leaves unchanged certain other macroscopic variables, such as volume or pressure. Latent heat is its opposite number: heat that is hidden, in the sense that it is exchanged without any change of temperature at all. The same source calls the two complementary terms, and that is exactly how they behave.<\/p>\n\n<p>The name is older than it looks, and it is not a comment on anybody&#8217;s judgement. <a href=\"https:\/\/en.wikipedia.org\/wiki\/Sensible_heat\" target=\"_blank\" rel=\"noopener\">Joule characterised it in 1847<\/a> as an energy that was indicated by the thermometer; sensible here means perceptible. If an exchange of heat moves a thermometer, it is sensible heat. If it does not, it is latent.<\/p>\n\n<p>Now the warning, because it matters more than it sounds. Sensible and latent heat are <strong>not two special forms of energy<\/strong>; the source is explicit that they are exchanges of heat under conditions specified by their effect on a material. There is no pool of sensible energy sitting inside the water waiting to be let out. There is an exchange, and a label for what that exchange did.<\/p>\n\n<p>One distinction underneath this one is assumed throughout. Heat is energy in transit and temperature is not energy at all \u2014 our guide to <a href=\"https:\/\/physicsfundamentalsinfo.com\/blog\/thermodynamics\/heat-vs-temperature\/\">heat and temperature<\/a> settles that properly, and this page takes it as read.<\/p>\n\n<h2>The Sensible Heat Formula and What Each Symbol Means<\/h2>\n\n<p>For a sample that stays in one phase, the sensible heat is the mass times the specific heat capacity times the temperature change.<\/p>\n\n<div class=\"pf-formula\">Q<sub>s<\/sub> = m c \u0394T<\/div>\n\n<p>Four quantities, each with the unit it has to be in before anything is multiplied:<\/p>\n\n<ul>\n<li><strong>Q<sub>s<\/sub><\/strong> \u2014 the sensible heat exchanged, in joules (J). Positive going in, negative coming out.<\/li>\n<li><strong>m<\/strong> \u2014 the mass of the sample, in kilograms (kg).<\/li>\n<li><strong>c<\/strong> \u2014 the specific heat capacity of the phase you are actually in, in J\/(kg\u00b7K). Ice, water and steam each have their own value, and using the wrong one is the commonest error on this topic.<\/li>\n<li><strong>\u0394T<\/strong> \u2014 the temperature change, in kelvin or in degrees Celsius. Both give the same number, because only the difference enters.<\/li>\n<\/ul>\n\n<p>This section states the formula and hands it on, rather than teaching it. The property doing the work is <em>c<\/em>, and it has a guide of its own: our <a href=\"https:\/\/physicsfundamentalsinfo.com\/blog\/thermodynamics\/specific-heat-capacity\/\">specific heat capacity<\/a> article defines it, tabulates it for real materials and works it in every direction. For the arithmetic, the <a href=\"https:\/\/physicsfundamentalsinfo.com\/calculators\/specific-heat\">Specific Heat Calculator<\/a> already solves this line for heat, mass, specific heat capacity or the temperature change, which is quicker than rearranging it by hand.<\/p>\n\n<p>What the formula will not tell you is when it applies. It holds while the sample stays in one phase. Reach a melting or a boiling point and the temperature stops moving, so \u0394T is zero and this line returns zero for that whole stretch \u2014 correct, and completely unhelpful, which is what the next section is about.<\/p>\n\n<h2>Sensible Heat and Latent Heat on One Heating Curve<\/h2>\n\n<p>Follow one kilogram of ice all the way to superheated steam and the two kinds of exchange alternate: three stretches where the temperature climbs, two where it stops while the phase changes. The simulator below draws exactly that curve. It belongs to our <a href=\"https:\/\/physicsfundamentalsinfo.com\/blog\/thermodynamics\/latent-heat\/\">latent heat<\/a> guide \u2014 it is titled &#8220;Latent Heat &amp; the Heating Curve&#8221; \u2014 and it is the one place on this site where you can watch the sensible stretches slope and the latent ones go flat.<\/p>\n\n<div class=\"pf-sim-slot\"><div class=\"pf-sim-slot-header\"><span class=\"icon-dot\"><\/span><span class=\"label\">Latent Heat Lab<\/span><\/div><div class=\"pf-sim-slot-body\"><style>.pf-sim-frame{width:100%;border:none;height:600px}@media(max-width:760px){.pf-sim-frame{height:1000px}}<\/style><iframe src=\"\/labs\/latent-heat.html?embed=1\" class=\"pf-sim-frame\" loading=\"lazy\"><\/iframe><\/div><\/div>\n\n<p>Three sliders drive it, and only two of them move the corners of the curve: <strong>Sample mass<\/strong> and <strong>Starting temp (ice)<\/strong>. The third, <strong>Heater power<\/strong>, changes only how fast the sweep fills, not where any corner sits. Let the sweep run to the end \u2014 it stops itself there, and the button reads <strong>Pause<\/strong> only while it is still running \u2014 and the corners it has drawn are how the five segment energies below can be checked against the thing that drew it.<\/p>\n\n<p>Read what it actually reports, though. It gives you a temperature, a phase and an energy added \u2014 it does not display a sensible share, a ratio or a partition. The division is yours to do, and the rest of this page is that division done carefully. Fuller instructions sit on its own landing page, the <a href=\"https:\/\/physicsfundamentalsinfo.com\/labs\/latent-heat-simulator\">Latent Heat Simulator<\/a>.<\/p>\n\n<p>Every constant it uses is printed on its own panel, which is why they can be quoted here without a reference: c<sub>ice<\/sub> = 2100, c<sub>water<\/sub> = 4186 and c<sub>steam<\/sub> = 2010 J\/(kg\u00b7K), with L<sub>f<\/sub> = 334,000 J\/kg and L<sub>v<\/sub> = 2,260,000 J\/kg. Starting from the boot state \u2014 1.0 kg of ice at \u221220 \u00b0C \u2014 the journey to steam at 150 \u00b0C breaks into five segments.<\/p>\n\n<div class=\"pf-table-scroll\" style=\"display:block;width:100%;max-width:100%;overflow-x:auto;-webkit-overflow-scrolling:touch;margin:1.5em 0;\">\n<table style=\"width:100%;border-collapse:collapse;word-break:break-word;\">\n<thead>\n<tr style=\"background:#0A1628;color:#FAF6EE;\">\n<th style=\"padding:9px 10px;text-align:left;border:1px solid #D9CFB8;\">Segment<\/th>\n<th style=\"padding:9px 10px;text-align:left;border:1px solid #D9CFB8;\">What happens<\/th>\n<th style=\"padding:9px 10px;text-align:left;border:1px solid #D9CFB8;\">Sensible or latent<\/th>\n<th style=\"padding:9px 10px;text-align:left;border:1px solid #D9CFB8;\">Arithmetic<\/th>\n<th style=\"padding:9px 10px;text-align:left;border:1px solid #D9CFB8;\">Energy (J)<\/th>\n<th style=\"padding:9px 10px;text-align:left;border:1px solid #D9CFB8;\">Running total (J)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">1<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">The ice warms from \u221220 \u00b0C to 0 \u00b0C<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\"><strong>sensible<\/strong><\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">1 \u00d7 2100 \u00d7 20<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">42,000<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">42,000<\/td><\/tr>\n<tr style=\"background:#F5F2EA;\"><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">2<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">The ice melts, at a fixed 0 \u00b0C<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">latent<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">1 \u00d7 334,000<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">334,000<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">376,000<\/td><\/tr>\n<tr><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">3<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">The water warms from 0 \u00b0C to 100 \u00b0C<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\"><strong>sensible<\/strong><\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">1 \u00d7 4186 \u00d7 100<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">418,600<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">794,600<\/td><\/tr>\n<tr style=\"background:#F5F2EA;\"><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">4<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">The water boils, at a fixed 100 \u00b0C<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">latent<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">1 \u00d7 2,260,000<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">2,260,000<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">3,054,600<\/td><\/tr>\n<tr><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">5<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">The steam warms from 100 \u00b0C to 150 \u00b0C<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\"><strong>sensible<\/strong><\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">1 \u00d7 2010 \u00d7 50<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">100,500<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">3,155,100<\/td><\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n\n<p>The two latent segments are the two flat stretches, and their arithmetic is Q<sub>l<\/sub> = m L \u2014 the subject of the <a href=\"https:\/\/physicsfundamentalsinfo.com\/blog\/thermodynamics\/latent-heat\/\">latent heat<\/a> guide, which explains why those plateaus behave as they do and where the two L values come from. They appear here for one purpose only: you cannot name a share without both parts of it. If you want the latent side worked on its own, the <a href=\"https:\/\/physicsfundamentalsinfo.com\/calculators\/latent-heat\">Latent Heat Calculator<\/a> handles it.<\/p>\n\n<figure style=\"margin:32px auto;max-width:720px;text-align:center;\">\n  <img src=\"https:\/\/physicsfundamentalsinfo.com\/blog\/wp-content\/uploads\/2026\/11\/sensible-heat-diagram-01-768x427.jpg\" srcset=\"https:\/\/physicsfundamentalsinfo.com\/blog\/wp-content\/uploads\/2026\/11\/sensible-heat-diagram-01-768x427.jpg 768w, https:\/\/physicsfundamentalsinfo.com\/blog\/wp-content\/uploads\/2026\/11\/sensible-heat-diagram-01.jpg 1520w\" sizes=\"auto, (max-width: 760px) 100vw, 720px\" width=\"1520\" height=\"846\" alt=\"Figure 1. The heating curve of one kilogram of water, with temperature in degrees Celsius up the vertical axis from minus 20 to 150, and energy added in kilojoules across one single linear horizontal axis from zero to 3155.1. The curve is drawn as five straight segments. The first, in gold, slopes up from minus 20 degrees at zero energy to 0 degrees at 42 kilojoules; a short leader line from the middle of that segment points up to its label, 42 kilojoules, which is set clear of the curve so that it cannot be read as a second label on the melting plateau beside it. That first segment is the ice warming. The second, in dark ink, runs perfectly flat at 0 degrees from 42 to 376 kilojoules, labelled 334 kilojoules, melting. The third, in gold, slopes up from 0 degrees to 100 degrees between 376 and 794.6 kilojoules, labelled 419 kilojoules. The fourth, in dark ink, runs perfectly flat at 100 degrees from 794.6 all the way to 3054.6 kilojoules, labelled 2260 kilojoules, boiling, and is by far the widest band on the figure. The fifth, in gold, slopes up from 100 degrees to 150 degrees between 3054.6 and 3155.1 kilojoules, labelled 100 kilojoules. Five tick marks on the energy axis mark the corners E1 to E5, whose running totals are printed beneath as 42,000 joules, 376,000 joules, 794,600 joules, 3,054,600 joules and 3,155,100 joules. Closing lines of text state that gold sloping segments are sensible heat and dark flat segments are latent heat, and that because the energy axis is a single linear scale the drawn widths are the energies, so the boiling plateau is 5.4 times as wide as the sensible climb that runs into it.\" loading=\"lazy\" decoding=\"async\" style=\"width:100%;height:auto;border-radius:4px;\">\n  <figcaption style=\"font-size:13px;color:#1F2E47;font-style:italic;margin-top:8px;\">Figure 1. One kilogram of water from ice at \u221220 \u00b0C to steam at 150 \u00b0C, on a single linear energy axis. Exactly: 42,000 J, 334,000 J, 418,600 J, 2,260,000 J and 100,500 J, running to 3,155,100 J at the far right. The boiling plateau looks absurdly wide because it is: at 2,260,000 J it really is 5.4 times the 418,600 J climb that runs into it.<\/figcaption>\n<\/figure>\n\n<h2>How Much of the Energy Is Actually Sensible?<\/h2>\n\n<p>Only 17.8% of it. Of the 3,155,100 J needed to take 1 kg of ice at \u221220 \u00b0C all the way to steam at 150 \u00b0C, 561,100 J is sensible heat and 2,594,000 J is latent \u2014 so the thermometer accounts for under a fifth of the whole journey.<\/p>\n\n<p>Add the table&#8217;s three sensible segments: 42,000 + 418,600 + 100,500 = 561,100 J. Add the two latent ones: 334,000 + 2,260,000 = 2,594,000 J. They sum to 3,155,100 J, and 561,100 \/ 3,155,100 = 0.177839, which is <strong>17.8% sensible and 82.2% latent<\/strong>.<\/p>\n\n<p>Check it against the sim rather than against this page. Let the sweep run to the end; it stops itself there. The energy readout then shows &#8220;3.16 MJ&#8221; \u2014 that is the panel rounding 3,155,100 J for display, not a second number, and the exact figure is the one every division here uses.<\/p>\n\n<p>One segment does most of the work. Boiling the water takes 2,260,000 J at a temperature that does not move, which is more than everything else on the journey put together: the other four segments come to 895,100 J between them.<\/p>\n\n<figure style=\"margin:32px auto;max-width:640px;text-align:center;\">\n  <img decoding=\"async\" src=\"https:\/\/physicsfundamentalsinfo.com\/blog\/wp-content\/uploads\/2026\/11\/a-pan-or-kettle-of-water-at-a-rolling-boil-with-the-steam-clearly-visible.webp\"\n       alt=\"Water at a rolling boil with steam rising, the latent half of the sensible heat and latent heat split\"\n       loading=\"lazy\"\n       style=\"width:100%;height:auto;border-radius:4px;\" width=\"1536\" height=\"1024\">\n  <figcaption style=\"font-size:13px;color:#1F2E47;font-style:italic;margin-top:8px;\">A rolling boil is the latent plateau made visible: energy pouring in at a temperature that has stopped moving. None of it is sensible heat.<\/figcaption>\n<\/figure>\n\n<p>Now the result that earns this page its keep. <strong>Changing the mass does not move the share at all<\/strong>, because every term in both totals carries exactly one factor of <em>m<\/em>, so it cancels top and bottom. Drag the mass slider across its whole range and the curve itself does not move at all \u2014 same shape, same corners, same pixels; what changes is the energy the axis is scaled to, and how far along it the sweep has got. Every corner&#8217;s energy moves with the mass; their proportions, and so the share, cannot.<\/p>\n\n<div class=\"pf-table-scroll\" style=\"display:block;width:100%;max-width:100%;overflow-x:auto;-webkit-overflow-scrolling:touch;margin:1.5em 0;\">\n<table style=\"width:100%;border-collapse:collapse;word-break:break-word;\">\n<thead>\n<tr style=\"background:#0A1628;color:#FAF6EE;\">\n<th style=\"padding:9px 10px;text-align:left;border:1px solid #D9CFB8;\">Mass (kg)<\/th>\n<th style=\"padding:9px 10px;text-align:left;border:1px solid #D9CFB8;\">Sensible (J)<\/th>\n<th style=\"padding:9px 10px;text-align:left;border:1px solid #D9CFB8;\">Whole curve (J)<\/th>\n<th style=\"padding:9px 10px;text-align:left;border:1px solid #D9CFB8;\">Sensible share<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">0.2 (slider floor)<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">112,220<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">631,020<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">0.177839<\/td><\/tr>\n<tr style=\"background:#F5F2EA;\"><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">0.5<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">280,550<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">1,577,550<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">0.177839<\/td><\/tr>\n<tr><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">1.0 (default)<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">561,100<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">3,155,100<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">0.177839<\/td><\/tr>\n<tr style=\"background:#F5F2EA;\"><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">2.5<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">1,402,750<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">7,887,750<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">0.177839<\/td><\/tr>\n<tr><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">3.0 (slider ceiling)<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">1,683,300<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">9,465,300<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">0.177839<\/td><\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n\n<p>The starting temperature does move it, and the surprise is how little. Start the ice at the slider&#8217;s floor of \u221250 \u00b0C and the sensible total rises to 624,100 J out of 3,218,100 J, a share of 19.4%. Start it at 0 \u00b0C and the sensible total falls to 519,100 J out of 3,113,100 J, a share of 16.7%. Colder means a bigger sensible share, every time.<\/p>\n\n<div class=\"pf-table-scroll\" style=\"display:block;width:100%;max-width:100%;overflow-x:auto;-webkit-overflow-scrolling:touch;margin:1.5em 0;\">\n<table style=\"width:100%;border-collapse:collapse;word-break:break-word;\">\n<thead>\n<tr style=\"background:#0A1628;color:#FAF6EE;\">\n<th style=\"padding:9px 10px;text-align:left;border:1px solid #D9CFB8;\">Ice starts at<\/th>\n<th style=\"padding:9px 10px;text-align:left;border:1px solid #D9CFB8;\">Sensible (J)<\/th>\n<th style=\"padding:9px 10px;text-align:left;border:1px solid #D9CFB8;\">Whole curve (J)<\/th>\n<th style=\"padding:9px 10px;text-align:left;border:1px solid #D9CFB8;\">Sensible share<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">\u221250 \u00b0C (slider floor)<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">624,100<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">3,218,100<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">19.4%<\/td><\/tr>\n<tr style=\"background:#F5F2EA;\"><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">\u221220 \u00b0C (default)<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">561,100<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">3,155,100<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">17.8%<\/td><\/tr>\n<tr><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">0 \u00b0C (slider ceiling)<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">519,100<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">3,113,100<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">16.7%<\/td><\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n\n<p>So across the entire reachable range of the mass and start-temperature sliders, the sensible share of a full water curve never reaches a fifth. From 16.7% to 19.4% is the whole of it, and nothing a reader can drag will break out of that band.<\/p>\n\n<figure style=\"margin:32px auto;max-width:720px;text-align:center;\">\n  <img src=\"https:\/\/physicsfundamentalsinfo.com\/blog\/wp-content\/uploads\/2026\/11\/sensible-heat-diagram-02-768x323.jpg\" srcset=\"https:\/\/physicsfundamentalsinfo.com\/blog\/wp-content\/uploads\/2026\/11\/sensible-heat-diagram-02-768x323.jpg 768w, https:\/\/physicsfundamentalsinfo.com\/blog\/wp-content\/uploads\/2026\/11\/sensible-heat-diagram-02.jpg 1520w\" sizes=\"auto, (max-width: 760px) 100vw, 720px\" width=\"1520\" height=\"640\" alt=\"Figure 2. The same journey as Figure 1, drawn as one horizontal bar whose full width represents the whole 3,155,100 joules. The bar is divided into five bands whose widths are proportional to their energies. The three sensible bands are gold and sit together on the left: a very narrow band for the 42 kilojoules of warming the ice, a wider one labelled 419 kilojoules for warming the water, and a narrow one for the 100 kilojoules of superheating the steam. Together they are bracketed and labelled sensible, 17.8 per cent. The two latent bands are dark and fill the rest of the bar: one labelled 334 kilojoules for melting and one much larger labelled boiling, 2260 kilojoules, which alone occupies most of the bar. Together they are bracketed and labelled latent, 82.2 per cent. Text beneath states the exact figures, 561,100 joules sensible and 2,594,000 joules latent out of 3,155,100 joules in total, that the band widths are proportional to the energies, and that the boiling band on its own is wider than everything else on the bar put together.\" loading=\"lazy\" decoding=\"async\" style=\"width:100%;height:auto;border-radius:4px;\">\n  <figcaption style=\"font-size:13px;color:#1F2E47;font-style:italic;margin-top:8px;\">Figure 2. The same 3,155,100 J as one bar: 561,100 J of sensible heat (gold, 17.8%) against 2,594,000 J of latent heat (dark, 82.2%). Band widths are proportional to the energies, so the 2,260,000 J boiling band is genuinely wider than the other four put together, which come to 895,100 J.<\/figcaption>\n<\/figure>\n\n<h2>The Sensible-to-Latent Ratio, and the Name It Already Has<\/h2>\n\n<p>The ratio of the two halves already has a name, and it is not a new one. It is the <a href=\"https:\/\/en.wikipedia.org\/wiki\/Bowen_ratio\" target=\"_blank\" rel=\"noopener\">Bowen ratio<\/a>, written B = Q<sub>h<\/sub>\/Q<sub>e<\/sub>, where Q<sub>h<\/sub> is that source&#8217;s symbol for the sensible heating and Q<sub>e<\/sub> its symbol for the latent heating. Divide joules by joules and the units vanish, which is why it is <strong>a unitless quantity<\/strong> \u2014 a plain number you can compare across completely different processes.<\/p>\n\n<p>It is used most commonly in meteorology and hydrology, and it was named by Harald Sverdrup after Ira Sprague Bowen (1898\u20131973), an astrophysicist. The reading is simple: when the magnitude of B is less than one, more of the available energy is going out as latent heat than as sensible heat, and above one the converse holds.<\/p>\n\n<p>Be precise about what it is a ratio <em>of<\/em>, though. The Bowen ratio proper compares two <strong>fluxes<\/strong> at a moist surface \u2014 energy per unit area per unit time, leaving a field or a lake. What follows is the same ratio applied to energies rather than to surface fluxes. A pan of water does not thereby have a Bowen ratio in the meteorological sense; it has the same algebra, which is a different claim.<\/p>\n\n<div class=\"pf-table-scroll\" style=\"display:block;width:100%;max-width:100%;overflow-x:auto;-webkit-overflow-scrolling:touch;margin:1.5em 0;\">\n<table style=\"width:100%;border-collapse:collapse;word-break:break-word;\">\n<thead>\n<tr style=\"background:#0A1628;color:#FAF6EE;\">\n<th style=\"padding:9px 10px;text-align:left;border:1px solid #D9CFB8;\">Process (1 kg of water)<\/th>\n<th style=\"padding:9px 10px;text-align:left;border:1px solid #D9CFB8;\">Sensible (J)<\/th>\n<th style=\"padding:9px 10px;text-align:left;border:1px solid #D9CFB8;\">Latent (J)<\/th>\n<th style=\"padding:9px 10px;text-align:left;border:1px solid #D9CFB8;\">Sensible share<\/th>\n<th style=\"padding:9px 10px;text-align:left;border:1px solid #D9CFB8;\">B<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">Warmed from 20 \u00b0C to 80 \u00b0C, no phase boundary crossed<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">251,160<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">0<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">100%<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">undefined<\/td><\/tr>\n<tr style=\"background:#F5F2EA;\"><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">Ice at 0 \u00b0C to water at 100 \u00b0C<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">418,600<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">334,000<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">55.6%<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\"><strong>1.25<\/strong><\/td><\/tr>\n<tr><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">Ice at \u221220 \u00b0C to steam at 150 \u00b0C<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">561,100<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">2,594,000<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\">17.8%<\/td><td style=\"padding:9px 10px;border:1px solid #D9CFB8;\"><strong>0.22<\/strong><\/td><\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n\n<p>Look at the middle two rows together, because they are the same substance. Over one stretch of its own curve a kilogram of water gives B = 1.25, which is sensible-dominated; over the whole of that curve it gives B = 0.22, which is latent-dominated. <strong>The split is a property of the process you choose, not of the material you chose it for.<\/strong><\/p>\n\n<p>There is also an identity worth having. The same source writes the evaporative fraction as EF = Q<sub>e<\/sub>\/(Q<sub>e<\/sub> + Q<sub>h<\/sub>) = 1\/(1 + B), and that is precisely the latent share by another route: 1\/(1 + 0.216307) = 0.822161, which is the 82.2% already in the table. On the sensible-dominated stretch the same identity gives 1\/(1 + 1.253293) = 0.443795, its own latent share of 44.4%.<\/p>\n\n<p>One more use of the word, flagged once and left alone: the same quantities appear in meteorology as a <em>sensible heat flux<\/em>, which is a power per unit area at a surface rather than an energy, and our guide to <a href=\"https:\/\/physicsfundamentalsinfo.com\/blog\/thermodynamics\/heat-flux\/\">heat flux<\/a> is where that belongs.<\/p>\n\n<h2>Why the Split Decides the Engineering<\/h2>\n\n<p>Because a machine sized for one half of the exchange can fail completely at the other. An air conditioner has two jobs: dropping the air temperature, which is the sensible part, and condensing moisture out of the air, which is the latent part. They are not interchangeable, and a unit chosen only for the temperature drop can leave a room cool and unpleasantly clammy.<\/p>\n\n<p>Evaporative cooling is the same trade read backwards. Water taken off a wet surface carries energy away as latent heat, and what the air gets in return is a lower temperature \u2014 sensible traded for latent, which is also why the trick works far better in dry air than in muggy air.<\/p>\n\n<p>Then there is the instrument problem. A thermostat responds to the sensible part only, because a thermometer is all it has. That is precisely why a room can sit obediently at its set temperature and still feel wrong: the latent side of the load is invisible to the thing controlling it.<\/p>\n\n<p>This section deliberately carries no figures. The numbers that would make it quantitative \u2014 moist-air properties, and the latent heat of vaporisation near a cooling coil, which is <em>not<\/em> the value this page quotes at boiling point \u2014 were not sourced for this article, and a remembered figure would be a guess. Take any you need from a source you can cite, and verify it before use.<\/p>\n\n<h2>Where the Idea Breaks Down, and What Gets Said Wrong<\/h2>\n\n<p>The commonest mistake is the one the definition warns against: treating sensible and latent heat as two kinds of energy that a substance contains. They are not. They are two descriptions of an <em>exchange<\/em>, sorted by what the exchange did to the material, and nothing in the water is labelled one way or the other before the energy arrives.<\/p>\n\n<p>The ratio breaks before the physics does. Warm water without crossing a phase boundary and the latent term is exactly zero, so B divides by zero \u2014 as the latent heating approaches zero the ratio becomes unbounded, which the source itself flags as making B a poor choice of variable for arid surfaces. This page therefore prints no value of B for the all-sensible case and uses the evaporative-fraction form, which stays finite and reads zero there.<\/p>\n\n<p>The other end is tamer but worth stating. With \u0394T = 0 the sensible heat is exactly zero, so B = 0 and EF = 1. A zero mass makes every one of these fractions nonsense, which is why the simulator&#8217;s slider stops at 0.2 kg and why no such case is quoted here.<\/p>\n\n<p>And <em>c<\/em> is not really a constant \u2014 it drifts with temperature, which our guide to the <a href=\"https:\/\/physicsfundamentalsinfo.com\/blog\/thermodynamics\/specific-heat-capacity-of-water\/\">specific heat capacity of water<\/a> takes apart properly; this page uses the single fixed values the simulator prints, so that every figure on it is reproducible.<\/p>\n\n<p>One claim here is proved rather than generalised. For water taken all the way to steam, <strong>latent heat always wins<\/strong>: the sensible heat above 0 \u00b0C is fixed at 519,100 J, so making the two halves equal would need the ice to start roughly 990 \u00b0C below zero. Since <a href=\"https:\/\/physicsfundamentalsinfo.com\/blog\/thermodynamics\/absolute-zero\/\">absolute zero<\/a> sits at \u2212273.15 \u00b0C, that start does not exist \u2014 the result is impossible, not merely off the end of a slider.<\/p>\n\n<h2>Worked Problems<\/h2>\n\n<div class=\"pf-problem\"><div class=\"pf-problem-num\">Problem 1<\/div><div class=\"pf-problem-question\">1.0 kg of water is warmed from 20 \u00b0C to 80 \u00b0C. How much sensible heat is that?<\/div><details><summary>Show Solution<\/summary><div class=\"pf-problem-solution\">\n\n<strong>Solution:<\/strong>\n\nStep 1: Only one phase is involved, so the whole exchange is sensible: Q<sub>s<\/sub> = m c \u0394T, with c<sub>water<\/sub> = 4186 J\/(kg\u00b7K).\n\nStep 2: The temperature change is \u0394T = 80 \u2212 20 = 60 \u00b0C.\n\nStep 3: Q<sub>s<\/sub> = 1.0 \u00d7 4186 \u00d7 60 = 251,160 J.\n\n<strong>Answer: Q<sub>s<\/sub> = 251,160 J, and all of it is sensible heat. No phase boundary is crossed, so the latent term is exactly zero and the sensible share is 100%.<\/strong>\n\n<\/div><\/details><\/div>\n\n<div class=\"pf-problem\"><div class=\"pf-problem-num\">Problem 2<\/div><div class=\"pf-problem-question\">0.50 kg of ice is warmed from \u221220 \u00b0C to 0 \u00b0C. How much sensible heat is that, and which specific heat capacity applies?<\/div><details><summary>Show Solution<\/summary><div class=\"pf-problem-solution\">\n\n<strong>Solution:<\/strong>\n\nStep 1: The sample is ice for the whole stretch, so the capacity to use is c<sub>ice<\/sub> = 2100 J\/(kg\u00b7K), not water&#8217;s 4186.\n\nStep 2: \u0394T = 0 \u2212 (\u221220) = 20 \u00b0C, with m = 0.50 kg.\n\nStep 3: Q<sub>s<\/sub> = 0.50 \u00d7 2100 \u00d7 20 = 21,000 J.\n\n<strong>Answer: Q<sub>s<\/sub> = 21,000 J, all of it sensible even though the sample is solid. The same mass of liquid water over the same 20 \u00b0C would take 0.50 \u00d7 4186 \u00d7 20 = 41,860 J, which is 4186 \/ 2100 = 1.993333333 times as much \u2014 so reaching for 4186 here overstates the answer by very nearly a factor of two.<\/strong>\n\n<\/div><\/details><\/div>\n\n<div class=\"pf-problem\"><div class=\"pf-problem-num\">Problem 3<\/div><div class=\"pf-problem-question\">1.0 kg of ice at 0 \u00b0C is taken to water at 100 \u00b0C. Split the energy into its sensible and latent parts, and find B.<\/div><details><summary>Show Solution<\/summary><div class=\"pf-problem-solution\">\n\n<strong>Solution:<\/strong>\n\nStep 1: Two exchanges happen. The melt at 0 \u00b0C is latent: Q<sub>l<\/sub> = 1.0 \u00d7 334,000 = 334,000 J.\n\nStep 2: The climb from 0 \u00b0C to 100 \u00b0C is sensible: Q<sub>s<\/sub> = 1.0 \u00d7 4186 \u00d7 100 = 418,600 J. The total is 334,000 + 418,600 = 752,600 J.\n\nStep 3: The sensible share is 418,600 \/ 752,600 = 0.556205, or 55.6%. The ratio is B = 418,600 \/ 334,000 = 1.253293, which is 1.25 to two decimal places.\n\n<strong>Answer: 418,600 J sensible, 334,000 J latent, 752,600 J in total \u2014 55.6% sensible, B = 1.25. B is greater than one, so this stretch is sensible-dominated.<\/strong>\n\n<\/div><\/details><\/div>\n\n<div class=\"pf-problem\"><div class=\"pf-problem-num\">Problem 4<\/div><div class=\"pf-problem-question\">Now take the same kilogram from ice at \u221220 \u00b0C all the way to steam at 150 \u00b0C, and split that.<\/div><details><summary>Show Solution<\/summary><div class=\"pf-problem-solution\">\n\n<strong>Solution:<\/strong>\n\nStep 1: Three sensible segments: 1 \u00d7 2100 \u00d7 20 = 42,000 J, 1 \u00d7 4186 \u00d7 100 = 418,600 J and 1 \u00d7 2010 \u00d7 50 = 100,500 J. Their sum is 42,000 + 418,600 + 100,500 = 561,100 J.\n\nStep 2: Two latent segments: 334,000 J to melt and 2,260,000 J to boil, so Q<sub>l<\/sub> = 334,000 + 2,260,000 = 2,594,000 J. The whole curve is 561,100 + 2,594,000 = 3,155,100 J.\n\nStep 3: The sensible share is 561,100 \/ 3,155,100 = 0.177839, or 17.8%, leaving 82.2% latent. The ratio is B = 561,100 \/ 2,594,000 = 0.216307, which is 0.22 to two decimal places.\n\n<strong>Answer: 561,100 J sensible, 2,594,000 J latent, 3,155,100 J in total \u2014 17.8% against 82.2%, B = 0.22. Same substance as problem 3 and the opposite verdict: B is below one here, so the full curve is latent-dominated.<\/strong>\n\n<\/div><\/details><\/div>\n\n<div class=\"pf-problem\"><div class=\"pf-problem-num\">Problem 5<\/div><div class=\"pf-problem-question\">Repeat the previous journey for 2.5 kg. What changes, and what does not?<\/div><details><summary>Show Solution<\/summary><div class=\"pf-problem-solution\">\n\n<strong>Solution:<\/strong>\n\nStep 1: Every term in both totals carries exactly one factor of the mass, so each one scales by 2.5 and nothing else changes.\n\nStep 2: Sensible 2.5 \u00d7 561,100 = 1,402,750 J; latent 2.5 \u00d7 2,594,000 = 6,485,000 J; total 2.5 \u00d7 3,155,100 = 7,887,750 J.\n\nStep 3: The share is 1,402,750 \/ 7,887,750 = 0.177839 \u2014 digit for digit what problem 4 gave.\n\n<strong>Answer: 1,402,750 J sensible, 6,485,000 J latent, 7,887,750 J in total, and still 17.8% sensible. Every joule scales with the mass; the fraction cannot, because the mass cancels between the numerator and the denominator.<\/strong>\n\n<\/div><\/details><\/div>\n\n<div class=\"pf-problem\"><div class=\"pf-problem-num\">Problem 6<\/div><div class=\"pf-problem-question\">The simulator&#039;s heater sits at its default 600 W. How long is the climb from 0 \u00b0C to 100 \u00b0C, how long is the boiling plateau, and how long is the whole curve?<\/div><details><summary>Show Solution<\/summary><div class=\"pf-problem-solution\">\n\n<strong>Solution:<\/strong>\n\nStep 1: Time is energy divided by power, t = Q \/ P, with P = 600 W throughout. These are the times a real heater at that power would take; the simulator animates the same sweep on compressed time, so its own clock is not these figures.\n\nStep 2: The sensible climb takes 418,600 \/ 600 = 697.666666667 s, which is 697.67 s to two decimal places, or 11 min 38 s to the nearest second. The boiling plateau takes 2,260,000 \/ 600 = 3,766.666666667 s, which is 3,766.67 s, or 62.8 min.\n\nStep 3: The whole curve takes 3,155,100 \/ 600 = 5,258.5 s, which is 87.6 min. The plateau is longer than the climb by the ratio of the two <em>energies<\/em>, 2,260,000 \/ 418,600 = 5.398949, or 5.4 times.\n\n<strong>Answer: 697.67 s, 3,766.67 s and 5,258.5 s. That 5.4 holds at every power setting, because the heater power cancels out of the ratio \u2014 turn the heater up and both times shrink together.<\/strong>\n\n<\/div><\/details><\/div>\n\n<div class=\"pf-problem\"><div class=\"pf-problem-num\">Problem 7<\/div><div class=\"pf-problem-question\">How cold would the ice have to start for the sensible and latent halves of the full curve to come out equal?<\/div><details><summary>Show Solution<\/summary><div class=\"pf-problem-solution\">\n\n<strong>Solution:<\/strong>\n\nStep 1: The sensible heat above 0 \u00b0C does not depend on the start at all: 418,600 + 100,500 = 519,100 J. Neither does the latent total, 2,594,000 J.\n\nStep 2: For the halves to match, the ice segment must supply 2,594,000 \u2212 519,100 = 2,074,900 J. With m = 1.0 kg and c<sub>ice<\/sub> = 2100 J\/(kg\u00b7K), that needs \u0394T = 2,074,900 \/ 2100 = 988.047619048 \u00b0C, so a start roughly 990 \u00b0C below zero. Round that to a neat 988 \u00b0C below zero and the curve is still latent-dominated, at B = 0.999961, so the rounding has to go the other way.\n\nStep 3: <a href=\"https:\/\/physicsfundamentalsinfo.com\/blog\/thermodynamics\/absolute-zero\/\">Absolute zero<\/a> is \u2212273.15 \u00b0C, and nothing can start below it.\n\n<strong>Answer: Impossible. For water taken all the way to steam the latent half always wins \u2014 not because the simulator&#8217;s slider stops at \u221250 \u00b0C, but because the starting temperature the balance would need lies below absolute zero.<\/strong>\n\n<\/div><\/details><\/div>\n\n<h2>Frequently Asked Questions<\/h2>\n\n<details class=\"pf-faq-item\"><summary>What is sensible heat?<\/summary><div class=\"pf-faq-item-answer\">\n\nSensible heat is heat exchanged with a body in a way that changes its temperature, leaving its phase and certain other macroscopic variables, such as volume or pressure, unchanged. A thermometer registers it, which is where the name comes from: sensible here means perceptible. For a single phase it is the mass times the specific heat capacity times the temperature change, in joules.\n\n<\/div><\/details>\n\n<details class=\"pf-faq-item\"><summary>What is the difference between sensible heat and latent heat?<\/summary><div class=\"pf-faq-item-answer\">\n\nSensible heat changes a temperature; latent heat is exchanged at constant temperature while the phase changes. They are complementary descriptions of one exchange rather than two kinds of energy, and between them they account for all of it. On a full water heating curve the sensible stretches slope and the latent ones sit flat, and on the simulator&#8217;s default journey, from ice at \u221220 \u00b0C to steam at 150 \u00b0C, the latent part carries 82.2% of the total.\n\n<\/div><\/details>\n\n<details class=\"pf-faq-item\"><summary>Is sensible heat the same as specific heat?<\/summary><div class=\"pf-faq-item-answer\">\n\nNo. Specific heat capacity, c, is a property of the material: the joules one kilogram of it needs per kelvin. Sensible heat is an amount of energy actually exchanged, measured in joules, and c is only one of the three factors in it, alongside the mass and the temperature change. One is a constant of a substance, the other is a quantity belonging to a process.\n\n<\/div><\/details>\n\n<details class=\"pf-faq-item\"><summary>Why is it called sensible heat?<\/summary><div class=\"pf-faq-item-answer\">\n\nBecause it is the heat a thermometer can sense. Joule characterised it in 1847 as an energy that was indicated by the thermometer, and sensible here carries its older meaning of perceptible rather than anything to do with good judgement. Latent heat earned the opposite name for the opposite reason: it is hidden, moving no thermometer at all while it is exchanged.\n\n<\/div><\/details>\n\n<details class=\"pf-faq-item\"><summary>What is the formula for sensible heat?<\/summary><div class=\"pf-faq-item-answer\">\n\nThe sensible heat is the mass times the specific heat capacity times the temperature change, which gives an answer in joules. Use the capacity of the phase you are actually in, since ice, water and steam each have their own, and keep the mass in kilograms. The formula covers only the stretches where the temperature moves; a phase change needs the latent-heat relation instead.\n\n<\/div><\/details>\n\n<details class=\"pf-faq-item\"><summary>What is sensible heat in HVAC?<\/summary><div class=\"pf-faq-item-answer\">\n\nIn air conditioning, sensible heat is the part of the load that changes the air temperature, while latent heat is the part that condenses moisture out of the air. Equipment has to cope with both, and a unit sized only for the temperature drop can leave a room cool but clammy. This page quotes no HVAC figures, because none was sourced for it; check any you need against a citable source.\n\n<\/div><\/details>\n","protected":false},"excerpt":{"rendered":"<p>Sensible heat is the heat that changes a temperature, which is why a thermometer registers it; latent heat is the part exchanged at constant temperature while the phase changes. The two are complementary descriptions of one exchange, not two kinds of energy. Of the 3,155,100 J needed to take 1 kg of ice at -20 C all the way to steam at 150 C, only 561,100 J &#8211; 17.8% &#8211; is sensible heat, and that share does not move when the mass does. This guide defines the term, states the formula and hands it on, computes the partition, names the sensible-to-latent ratio, and works seven problems with every step shown.<\/p>\n","protected":false},"author":1,"featured_media":2471,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3],"tags":[],"class_list":["post-2464","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-thermodynamics"],"_links":{"self":[{"href":"https:\/\/physicsfundamentalsinfo.com\/blog\/wp-json\/wp\/v2\/posts\/2464","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/physicsfundamentalsinfo.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/physicsfundamentalsinfo.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/physicsfundamentalsinfo.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/physicsfundamentalsinfo.com\/blog\/wp-json\/wp\/v2\/comments?post=2464"}],"version-history":[{"count":4,"href":"https:\/\/physicsfundamentalsinfo.com\/blog\/wp-json\/wp\/v2\/posts\/2464\/revisions"}],"predecessor-version":[{"id":2475,"href":"https:\/\/physicsfundamentalsinfo.com\/blog\/wp-json\/wp\/v2\/posts\/2464\/revisions\/2475"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/physicsfundamentalsinfo.com\/blog\/wp-json\/wp\/v2\/media\/2471"}],"wp:attachment":[{"href":"https:\/\/physicsfundamentalsinfo.com\/blog\/wp-json\/wp\/v2\/media?parent=2464"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/physicsfundamentalsinfo.com\/blog\/wp-json\/wp\/v2\/categories?post=2464"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/physicsfundamentalsinfo.com\/blog\/wp-json\/wp\/v2\/tags?post=2464"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}